Life cycle comparison of hydrothermal liquefaction and lipid extraction pathways to renewable diesel from algae

Algae biomass is an attractive biofuel feedstock when grown with high productivity on marginal land. Hydrothermal liquefaction (HTL) produces more oil from algae than lipid extraction (LE) does because protein and carbohydrates are converted, in part, to oil. Since nitrogen in the algae biomass is incorporated into the HTL oil, and since lipid extracted algae for generating heat and electricity are not co-produced by HTL, there are questions regarding implications for emissions and energy use. We studied the HTL and LE pathways for renewable diesel (RD) production by modeling all essential operations from nutrient manufacturing through fuel use. Our objective was to identify the key relationships affecting HTL energy consumption and emissions. LE, with identical upstream growth model and consistent hydroprocessing model, served as reference. HTL used 1.8 fold less algae than did LE but required 5.2 times more ammonia when nitrogen incorporated in the HTL oil was treated as lost. HTL RD had life cycle emissions of 31,000 gCO₂ equivalent (gCO₂e) compared to 21,500 gCO₂e for LE based RD per million BTU of RD produced. Greenhouse gas (GHG) emissions increased when yields exceeded 0.4 g HTL oil/g algae because insufficient carbon was left for biogas generation. Key variables in the analysis were the HTL oil yield, the hydrogen demand during upgrading, and the nitrogen content of the HTL oil. Future work requires better data for upgrading renewable oils to RD and requires consideration of nitrogen recycling during upgrading.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

Evidence for a male-produced pheromone in <Emphasis Type="Italic">Tetropium fuscum</Emphasis> (F.) and <Emphasis Type="Italic">Tetropium cinnamopterum</Emphasis> (Kirby) (Coleoptera: Cerambycidae)

(E)-6,10-dimethyl-5,9-undecadien-2-ol (geranyl acetol), termed here fuscol, was identified as a male-produced pheromone emitted by Tetropium fuscum (F.) and Tetropium cinnamopterum Kirby. In field experiments, traps baited with synthetic fuscol alone were not significantly attractive, but the combination of fuscol plus host volatiles (a synthetic blend of monoterpenes plus ethanol) attracted significantly more male and female T. fuscum and female T. cinnamopterum than did host volatiles alone. This is the first homoterpenoid alcohol to be described in the Cerambycidae, and the first pheromone reported from the sub-family Spondylidinae.     

Globalization’s limits to the environmental state? Integrating telecoupling into global environmental governance

Globalization entails increased interdependence and interconnectivities among distal regions and social-ecological systems. This global interregional connectedness – telecoupling – gives rise to specific sustainability challenges, which require new governance solutions. Moving beyond ‘scaling-up’ governance to address global environmental problems, and exploring the implications of telecoupling for state-led environmental governance, ways the state can effectively address telecoupled environmental issues both within and beyond national borders are addressed, drawing on the example of soy trade between Brazil and Germany. This builds on recent contributions to the literature on governance of interregional ecological challenges to elaborate potential policy and governance options, ranging from classical bilateral, multilateral, and international agreements, to information-based, economic, and hybrid governance modes. While telecoupled environmental problems create governance challenges related to scale, knowledge gaps, coordination, and state capacity, the state has an important role to play. To explore this further, interdisciplinary inquiry is required that includes but moves beyond the state.     

Pilot-Scale Demonstration of an Innovative Treatment for Vapor Emissions

ABSTRACT

Researchers from the National Renewable Energy Laboratory recently conducted a pilot-scale study at McClellan Air Force Base (AFB) in Sacramento, CA. The objective of the test was to determine the effectiveness of an ambient-temperature, solar-powered photocatalytic oxidation treatment unit for destroying emissions of chlorinated organic compounds from an air stripper. This paper reports test results and discusses applications and limitations of the technology.

A 10-standard-cubic-foot-per-minute (SCFM) (28.3 L/min) slip stream of air from an air stripper at Operative Unit 29-31 at McClellan AFB was passed through a reactor that contained a lightweight, perforated, inert support coated with photoactive titanium dioxide. The reactor faced south and was tilted at a 45° angle from vertical so that the light-activated catalyst received most of the available sunlight. An online portable gas chro-matograph with two identical columns simultaneously analyzed the volatile organic compounds contained in the reactor inlet and outlet air streams. Summa canister grab samples of the inlet and outlet were also collected and sent to a certified laboratory for U.S. Environmental

Protection Agency Method TO-14 analysis and verification of our field analyses. Three weeks of testing demonstrated that the treatment system's destruction and removal efficiencies (DREs) are greater than 95% at 10 SCFM with UV intensities at or greater than 1.5 milliwatts/square centimeter (mW/cm²). DREs greater than 95% at 20 SCFM were obtained under conditions where UV irradiation measured at or greater than 2 mW/cm². In Sacramento, this provided 6 hours of operation per clear or nearly clear day in April. A solar tracking system could extend operating time. The air stream also contained trace amounts of benzene. We observed no loss of system performance during testing.     

Evaluation of best management practice products in preventing discharge of metals: a laboratory evaluation

Heavy metal accumulation in soil poses serious environmental and health risks, as metals are carried with eroded soils. In this study, 17 different soil erosion and sediment control products were investigated for their effectiveness in controlling transport of particulate heavy metals (Cu, Zn, Pb, Cd). Among the treatments investigated, wood mulch and tackifiers were found to be the most effective in reducing total suspended solids (TSS) and total heavy metal losses. They reduced TSS to an undetectable level during short-term simulation tests. Paper mulch was the only treatment that had no significant reduction in both total metal loss and TSS. Fiber rolls, silt fences, and gravel bags were effective in reducing sediment loss. Although the netting/blanket treatments were not effective in reducing total metal discharge, they significantly reduced sediment loss compared with the control.     

Partitioning of metals in a degraded acid sulfate soil landscape: influence of tidal re-inundation

The oxidation and acidification of sulfidic soil materials results in the re-partitioning of metals, generally to more mobile forms. In this study, we examine the partitioning of Fe, Cr, Cu, Mn, Ni and Zn in the acidified surface soil (0-0.1 m) and the unoxidised sub-soil materials (1.3-1.5 m) of an acid sulfate soil landscape. Metal partitioning at this acidic site was then compared to an adjacent site that was previously acidified, but has since been remediated by tidal re-inundation. Differences in metal partitioning were determined using an optimised six-step sequential extraction procedure which targets the “labile”, “acid-soluble”, “organic”, “crystalline oxide”, “pyritic” and “residual” fractions. The surficial soil materials of the acidic site had experienced considerable losses of Cr, Cu, Mn and Ni compared to the underlying parent material due to oxidation and acidification, yet only minor losses of Fe and Zn. In general, the metals most depleted from the acidified surface soil materials exhibited the greatest sequestration in the surface soil materials of the tidally remediated site. An exception to this was iron, which accumulated to highly elevated concentrations in the surficial soil materials of the tidally remediated site. The “acid-soluble”, “organic” and “pyritic” fractions displayed the greatest increase in metals following tidal remediation. This study demonstrates that prolonged tidal re-inundation of severely acidified acid sulfate soil landscapes leads to the immobilisation of trace metals through the surficial accumulation of iron oxides, organic material and pyrite.     

Cross-Media Environmental Impacts of Air Pollution Regulations for a Coal-Fired Power Plant

The types and rates of pollutant emissions from a coal-fired power plant depend upon plant design, coal characteristics, and environmental control policy. In the past, air pollution regulations were often promulgated without rigorous analysis of the resulting energy penalties and secondary environmental impacts that occur in other environmental media (air, land, or water), which are counterproductive to overall environmental quality. This paper describes a Comparative Assessment Model that has been developed to consider systematically such tradeoffs for conventional and advanced coal-to-electric technologies. The model is applied to quantify the secondary (“cross-media”) environmental and resource impacts resulting from alternative air pollution control policies that reduce sulfur dioxide emissions from a 1000 MW power plant. Multimedia pollutant burdens are presented, together with the increased requirements for coal, limestone, and water that are incurred in generating a fixed net quantity of electricity. The development of sound public policy requires that environmental regulations be sensitive to adverse effects in all environmental media, and that tradeoffs involved in the regulation of specific pollutants to one medium be rigorously and systematically characterized.